HJE11B-60A Compliant with UC2 Single Phase Latching Relay

Core Product Values:
 Wall-mounted Design: The structure is adapted to wall-mounted installation scenarios, facilitating wiring and maximizing space utilization.
 Zero Power Consumption with Magnetic Latching: Power consumption is only momentary during switching; no power supply is required for long-term operation, resulting in energy efficiency.
 60A Reliable On/Off: High-quality contact materials ensure stable load switching and support frequent operation.
 UC2 Safety Certification: Excellent insulation and withstand voltage performance, suitable for outdoor and complex power environments.

Typical Application Scenarios:
 Remote On/Off Control of Wall-mounted Smart Meters
 Centralized Metering Management in Outdoor Distribution Boxes
 Independent Meter Load Control in Rental Housing
 Distributed Energy Metering and Management Terminal

• 60Aswitching capability
• Veryminimal power consumption from the coil
• 4KVdielectrics strength coil to contact
• IEC-62055-31UC2 compliant
• Outlinedimensions (39×30×16.5）mm
• RoHS， CQC-compliant

Application Notes

1、All relays are shipped in the “closed” position. It is possible that during transit or final assembly, the relay could change its state to the “open” position. Therefore, it is recommended that all relays be set to the desired state of the relay via a power supply.

2、In order to maintain an “open” or “closed” state of the relay, the coil voltage should reach the rated voltage. The pulse width should be 5 times the operating time to ensure a proper change of state. Do not energize both T1, T2, and T3 at the same time on a dual coil, or energize the coil for longer than 1 minute (damage to the coil could occur).

3、Relays have polarity; if the user’s need is different fromthe information, please contact us.

4、The relay to the factory inspection and use should be handled to prevent damage to the factory for damaging the goods, shoud be strict distinction between the normal product and must not be used.