HJE11C-90A-250VAC Latching Relay

Core Advantages:

Magnetic Latching Technology: Employing advanced magnetic latching principles, the relay maintains its operational state even after power failure, ensuring continuous and stable system operation.

High Load Capacity: Maximum current carrying capacity of 90A, suitable for high-power load power control, with high reliability.

Low Power Consumption Design: Consumes extremely low electrical energy during operation, saving energy and extending equipment lifespan.

Fast Response: The relay has a high response speed, suitable for power protection systems requiring precise and rapid response.

Application Scenarios:

Power Protection Systems: Widely used in power distribution networks, substations, and other power systems for overload protection and short-circuit alarms, ensuring safe grid operation.

Automation Control: Suitable for current control in industrial automation equipment and control panels, ensuring the safe and stable operation of equipment.

Smart home: Used in smart home devices to achieve efficient and energy-saving power control and management.

• 90Aswitching capability
• Veryminimal power consumption from the coil
• 4KVdielectrics strength coil to contact
• IEC-62055-31UC2 compliant
• Outlinedimensions(39×30×16.5)mm
• RoHS， CQC-compliant

 Application Notes

1、All relays are shipped in the “closed” position. It is possible that during transit or final assembly, the relay could change its state to the “open” position. Therefore, it is recommended that all relays be set to the desired state of the relay via a power supply.

2、In order to maintain an “open” or “closed” state of the relay, the coil voltage should reach the rated voltage. The pulse width should be 5 times the operating time to ensure a proper change of state. Do not energize both T1, T2, and T3 at the same time on a dual coil, or energize the coil for longer than 1 minute (damage to the coil could occur).

3、Relays have polarity; if the user’s need is different from the information, please contact us.

4、The relay to the factory inspection and use should be handled to prevent damage to the factory. For damaging the good,s shoud be strict distinction should be made between the normal product and those that must not be used.