HJE11F-120A-250VAC Latching Relay

Core Values

Stabilized Zero Energy Consumption, Dynamically More Reliable: Requires an electrical signal only during switching; operates without power consumption or heat generation during long-term operation.

120A High Load Endurance: Silver-based composite contact material withstands frequent switching impacts and adapts to harsh 250VAC environments.

Power-Off State Memory: Maintains contact state during unexpected power outages, ensuring system continuity.

Military-Grade Structure: Compact housing with shock-resistant design, adaptable to complex industrial conditions.

Precise Application Scenarios
Smart Meter Remote Load Control System
Photovoltaic Power Station Grid-Connected/Off-Grid Switching Device
Electric Vehicle Charging Pile Power Control Module
Industrial Equipment Soft Start/Safety Protection Circuit

• 120Aswitching capability
• Veryminimal power consumption from the coil
• Thetemperature rise of the relay is low
• 4KVdielectrics strength coil to contact
• IEC-62055-31UC3 compliant
• Outlinedimensions(42×32×21)mm
• RoHS， CQC-compliant

Application Notes

1、All relays are shipped in the “closed” position. It is possible that during transit or final assembly, the relay could change its state to the “open” position. Therefore, it is recommended that all relays be set to the desired state of the relay via a power supply.

2、In order to maintain an “open” or “closed” state of the relay, the coil voltage should reach the rated voltage. The pulse width should be 5 times the operating time to ensure a proper change of state. Do not energize both T1, T,2 and T3 at the same time on a dual coil, or energize the coil for longer than 1 minute (damage to the coil could incur).

3、Relays have polarity; if the user’s need is different fromthe  information, please contact us.

4、The relay to the factory inspection and use should be handled to prevent damage to the factory for damaging the goods, shoud be strict distinction between the normal product and must not be used.