HJE32A-100A Compliant with UC3 Compact Three Phase Latching Relay

Compact Design: Breakthrough small-size structure achieves three-phase on/off control within a limited space, greatly improving the power density and integration of the device.
High Current Carrying Capacity: Supports 100A high current load per phase, designed specifically for high-power three-phase applications, meeting stringent industrial and energy requirements.
Extreme Energy Saving: Utilizes magnetic latching technology, consuming power only during operation, with zero standby power consumption, significantly reducing long-term system energy consumption.
High Reliability and Safety: Strictly complies with the high UC3 standard, ensuring excellent safety and long-term stable operation under high loads.
Main Application Areas: An ideal core switching component for three-phase smart meters, charging piles, photovoltaic inverters, small UPS, and compact industrial control equipment.

• Three-phase / Three setsof  contacts with 100A switching capability
• Appliedto three phase DIN rail meter for input and output at the bottom
• Loadlead-out mode: 1 input 2 output, 3 input 4 output, 5 input 6 output
• 4KVdielectrics strength coil to contact
• IEC-62055-31UC3 compliant
• Outlinedimensions(96.8×35.5×18.8)mm
• Optionalwith auxiliary switch
• RoHScompliant

Application Notes

1、All relays are shipped in the “closed” position. It is possible that during transit or final assembly the relay could change its state to the “open” position. Therefore, it is recommended that all relays be set to the desired state of the relay via a power supply.

2、In order to maintain an “open” or “closed” state of the relay, the coil voltage should reach the rated voltage. The pulse width should be 5 times the operating time to ensure a proper change of state. Do not energize both T1, T2, and T3 at the same time on a dual coil, or energize the coil for longer than 1 minute (damage to the coil could occur).

3、Relays have polarity; if the user’s need is different from the information, please contact us.

4、The relay to the factory inspection and use should be handled to prevent damage to the factory for damaging the good,s shoud be strict distinction should be made between the normal product and those that must not be used.